Call: 02089881662

Category: Boilers

Boiler Installation – How Much Should It Really Cost?

Posted on by rob.fullsend

The cost of purchasing and installing a new boiler can vary enormously, even between boilers of the same type. Here, we look at what you should expect to pay for your new boiler to be installed, and the details of such.

Boiler installation is a complex task and should only be undertaken by a qualified, Gas Safe Registered engineer, so learn here about what you can expect to pay in the process.

The Cost of a New Boiler

A common question that we get is “How much is a new boiler?”. Depending on the type, a new boiler’s cost and installation can widely vary in price.

The average cost of a new boiler can range from £625-750 for a small domestic boiler, to £2,500 for premium domestic models, all the way up to £7.5k or 8.75k for a large commercial unit. New combi or system boilers are, as a rule, cheaper than conventional heat-only boilers.

The cost of getting a new boiler fitted can depend to some extent on the boiler you’re getting, as well as the installation location. A straight replacement in the same spot, for example, will cost far less to install than a completely new, different boiler in a different location. This is because new pipework will need to be fitted on top of any necessary modifications to the location itself.

 

Types of Boilers & Their Prices

Below, you will find some typical prices for various boiler replacement scenarios, do keep in mind this is a ball park figure and they can change depending on the current climate and inflation standards. Nonetheless, these example costs include boiler, labour, parts and VAT – and we’ve included a power flush as standard.

Conventional (heat only) boiler

Regular boilers are heat-only devices. The boiler provides the heating and a cylinder provides hot water. The scenarios below show costs for replacing a regular boiler in its existing location, and for installing a new regular boiler in a new location.

The cost of moving the boiler will depend on whether it will be in the same room or moved to another room. Both of these prices assume that the cylinder and other equipment not directly related to the boiler remain in the same place.

  • Replacing a heat-only boiler in the same location: £2,937 (2 days)
  • Replacing a heat-only boiler in a new location: £3437 (2.5 days)

Assumed mid-range boiler cost of £1000.

 

Combi Boiler

Combination boilers provide both heating and hot water via the boiler, with no need for a cylinder to perform this function. Usually, a combi boiler installation will consist of either replacing an existing combi boiler or replacing a conventional boiler and hot water cylinder together.

Replacing an existing combi boiler

Here, we show approximate costs for a new combi boiler in situ, and in a new location.

  • Replacing a combi boiler, same location: £2,937 (2 days)
  • Replacing a combi boiler, new location: £3,687 (2.5 days)
  • Replacing a regular boiler & hot water cylinder with combi boiler: £4,250 (3 days)

This kind of replacement might need extensive additional work to remove the cylinder and redirect pipes to the new boiler location.

  • Replacing a conventional boiler & tank with combi boiler: £4,062 (3 days)

Assumed mid-range boiler cost of £1125.

Side Note: Any combi boiler replacement needs to be Boiler Plus compliant. Boiler Plus, which came into effect in April 2018, sets out revised energy efficiency and technical requirements for any new or replacement gas boilers being fitted in England.

The scheme stipulates that timing and temperature controls are required in new or replacement combi boilers An additional energy efficiency measure is required, such as weather compensation, load compensation, Flue Gas Heat Recovery, or smart heating controls. Each compliance method can be tailor-made for the customer’s requirements.

 

System Boiler

System boilers use an unvented tank to provide hot water and provide heating. System boilers offer excellent performance and are suitable for buildings with multiple bathrooms in use.

Typical scenarios involve replacing an old system boiler in the same location, replacing a conventional boiler & vented cylinder with a system boiler & unvented hot water tank, and replacing a combi with a system boiler/unvented hot water tank (standard for property extensions).

  • Replacing a system boiler, retaining the unvented hot water tank: £2,875 (2 days)
  • Replacing a conventional boiler/hot water tank with system boiler/unvented hot water tank: £5,562 (3-4 days)
  • Replacing a combi boiler with system boiler/unvented hot water tank: £5812 (3-4 days)

Assumed mid-range boiler cost of £1062.

 

Back Boiler

Back boilers are no longer installed, so the costs we will go through here are for replacing a back boiler with a newer boiler. A conventional boiler can be installed, retaining the hot water tank, or a combi boiler can be installed without the tank.

  • Replacing a back boiler with a new heat-only boiler, retaining the hot water tank: £3,937 (3 days)
  • Replacing a back boiler and hot water tank with a new combi boiler: £4,312 (3 days)

Assumed mid-range boiler cost of £1062.

 

Frequently Asked Questions

Can I Install A Boiler Myself

It is strongly advised to hire a commercial boiler installation team to install your boiler. The installation of a boiler typically requires professional expertise and certification. This is because it is an incredibly complex process that involves not only the fitting of the boiler itself but also the connection to water, gas and electrical systems.

It is also critical to comply with building regulations and safety standards as there are significant safety risks including gas leaks, carbon monoxide poisoning, and potential damage to property.

Is It Worth Getting A New Boiler or Should I Stick To Repairs?

In the UK getting a new boiler is often ‘worth it’ for several reasons as new boilers are energy efficient this leads to lower bills and reduced emissions. They are also more reliable, requiring fewer repairs and maintenance saving you money in the long term.

Upgrading improves heating performance and can increase property value. The investment in a new commercial boiler installation can lead to more comfort, savings and higher resale value for homeowners.

How Often Should I Replace My Boiler

The typical lifespan of a boiler is around 10 to 15 years but the actual lifespan can vary depending on factors such as the type of boiler, its usage and how well it has been maintained. M&E maintenance can extend the lifespan of your systems significantly, look out for signs of wear and tear, increased noise, reduced heating performance and higher energy bills as it may be time to replace it. Regular commercial boiler servicing by a qualified engineer can help assess the condition of your boiler and determine if replacement is necessary.

Before You Go…

The cost of each boiler installation depends on the individual building, the existing setup and the new boiler’s specific requirements. Additional factors such as construction costs and individual access requirements can also further drive up expenses.

Expect to pay upwards of £1,250 in any circumstance, plus the cost of the boiler itself, and block out 2 or 3 days for the installation. For more information on how Kiasu Workforce can help you with commercial boiler installations, get in touch with us today.

5 signs you need a new boiler installed

Posted on by rob.fullsend

Do you need a new boiler?

Boilers help to keep our homes warm and our water hot. But unless these two things stop happening completely, it may be hard for you to detect when you need a new boiler. Having your boiler regularly serviced and having maintenance work carried out can prevent the likelihood of a big breakdown.

But don’t fret, there are a number of telltale signs that you can look out for that indicate that you may need a new boiler installed in your home. A mix of age issues, possible smells and the time it takes to heat up your home can all be signs of issues that may arise. Here at Kiasu Workforce, as a team of boiler experts, we’re here to tell you exactly what you need to keep an eye out for.

5 signs you need a new boiler installed

Age

Boilers aren’t installed with an expiry date, so there’s no exact way to tell how long they have got left in them. However, a good indicator of how healthy your boiler is is how many years you have had it. On average, it’s best to start thinking about a new boiler once yours reaches 10 years of being installed. It may not necessarily be on it’s ‘last legs’, but new technologies are constantly emerging when it comes to boilers, meaning a newer version is likely to be more efficient.

Smell

You wouldn’t think it, with carbon monoxide itself being odourless, but any sort of smell coming from your boiler could potentially be a warning sign of a leak. The smell is simply a sign that the boiler is not burning properly and this is a situation that needs to be dealt with the moment you realise there is an issue. A great way to not get caught out with a leak is to have a carbon monoxide alarm installed to catch them right at the source and indicate that you need your boiler repairing.

Noises

It’s fairly common for boilers to make noises when they are first heating up, but these should subside to be almost unnoticeable so another sign to be aware of is that of any unfamiliar noises. Any loud bangs, clunking or whirring noises could indicate an issue that means your boiler isn’t functioning properly. There could be an issue with bubbles, broken valves or even the heat pump. We suggest turning off your boiler if you do hear these noises and calling out an engineer.

Time

A less noticeable indication that you need a new boiler is if it is taking its time to do its job. Do you switch the heating on but not feel the benefit for quite some time? The majority of modern or newly installed boilers can reach their maximum temperature fairly quickly, so a slow down in a boiler doing its job means it might be time to shop around for a new boiler.

Money

The increase in your bills is also a clear signal that a new boiler could possibly be on the horizon for your home. Like discussed previously, newer boilers are mostly more efficient and can, in fact, save you money. This also works with the above element of time, in that if you’re boiler is left on for longer due to it taking its time to heat up, it’s essentially costing you more money to run so being aware of your bills is essential in getting the best out of your boiler.

5 signs

These are 5 simple signs to be aware of that may indicate that you need a new boiler installing. Kiasu Workforce is made up of fully qualified gas engineers so we can provide the best service with regards to boiler installation and 24/7 maintenance & repairs. Call us on 020 8988 1662 today for fixed, competitive prices with no hidden charges.

What to do while you wait for an emergency plumber

Posted on by rob.fullsend

Stay safe and avoid further damage whilst you wait for an emergency plumber to arrive

Dealing with a plumbing emergency

Ok, so you’ve made the phone call. The emergency plumber is on their way. You might have a dripping tap leading to a pool of standing water in your kitchen. Or your mains pipe might have burst, leaving you knee-deep in your own living room. Here are the critical steps to take right now.

Turn off the mains water supply

Emergency plumber - Valve - KiasuYou can control the water entering your property using the inside stop valve. This is usually located under the kitchen sink. If it’s not there, try your airing cupboards. It might be under the floorboards near the front door, so check to see if there is any visible access point. Turn the valve clockwise, and be gentle.

If you can’t find the inside stop valve, you will need to go to the outside stop valve and shut the water off there instead. This is usually on the boundary of your property, and might be in the same pit as your water meter. Some homes, particularly older properties, don’t have outside stop valves.

You may need to obtain a valve or universal stopcock key from a DIY chain or plumber’s merchants. Also, be aware that turning the valve off may affect the neighbours if your home is on a shared water supply.

Keep trying

If you don’t know where to find your valves, try calling someone who will such as your landlord. Someone who has lived in the property in the past may know where to find it. You could try getting in touch if you have their contact details. Failing that, a grovelling call to Mum or Dad will probably help you out.

Even after you’ve turned the supply off, the leak may continue. A storage tank in your home could mean that water will keep flowing until the tank is empty.

Don’t try to fix it yourself

Unless you are a plumber yourself, attempting to fix the problem could end in catastrophe. Don’t make things worse by disconnecting things like pipes or taps, or taking toilets and sinks apart. Don’t push anything down a drain to unblock it. If your efforts lead to more damage, your insurance company might refuse to pay out.

Electricity - Fuse Box - Kiasu

Ensure electrical safety

Electricity and water do not mix well. Move any electrical items or wires out of the way of the water. Do this before the leak has a chance to spread.

Put items up high if possible, rather than moving them further away on the same level. Take care not to electrocute yourself during this procedure.

If necessary, turn the power off using the master switch in your fuse box.

If the water has already made contact with electrical items, this is probably the safest option. Just make sure it’s safe to do so first.

Contain what you can

If the leak is small, you can probably prevent most damage. Use a bucket to catch drips, or use towels to soak up the water. If it’s spraying out of a pipe, you might be able to position a towel to catch the spray and redirect it to a bucket.

For a larger leak, you need to make the area safe before you attempt anything. Turn off the power supply if need be.

Assess the water damage

Where is it going, how much is there and which items or parts of your home does it threaten to ruin? Work out what is most important to you and secure it. Decide how you are going to clean up and dispose of the water.

Move the furniture and any valuable items

Don’t let water seep into your prized Persian rugs, your sofas, cupboards, or even chair and table legs. Get anything valuable out of the way quickly.

If you have something suitable, use it to cut off the water’s path. Sandbags are the obvious choice. However blankets, towels or old clothes will do. Try to ensure the water won’t spread to somewhere equally damaging as a consequence of being diverted.

Clear up the water with a mop and bucket

It is essential that you clear any standing water as soon as possible. This way, your plumber will be able to gain access easily and safely. You’ll also prevent yourself slipping over. As well as being safer, clearing up quickly is the best way to avoid damage.

If there’s a lot, ask for help!

Get on the phone to a friend or family member. It may feel like a big favour to ask of somebody at the time. But getting your home dry quickly could be the difference between a repair charge and weeks of construction work. You can always take them out for lunch later on!

Think ahead

Take pictures or videos

Make sure you get some snaps of what’s happened. This will assist with any insurance claims, and could help your plumber when they arrive. Not to mention how much it will impress your friends when you show them afterwards.

Make a note of any past problems

Jot down any plumbing-related issues you’ve experienced in the past. This might be an issue you’ve had to fix before, or it might be that you’ve noticed low water pressure at a tap, for example. This will help your emergency plumber to diagnose the issue. It may also help with insurance matters.

Leave the emergency plumber to it

Your plumber needs nothing more than space, and the ability to concentrate. They’ll give you a shout if there’s anything you can do to help.

Emergency plumber - Wrenches - Kiasu

Conclusion

When an emergency occurs, it’s a case of taking the right steps, in the right order, without delay. Don’t panic, as you might make things worse in your haste. Do act decisively.

Shut off the supply, make things safe, contain what you can. Then think about the less urgent things like gathering evidence and making preparations.

Make sure you choose a safe, trusted emergency plumbing company. Your bill is likely to be the same as getting it done by your mate’s mate who you once met in the pub – until you find out the true cost of their shoddy work down the line.

Article by Barney Scott, Kiasu Group

© 2019 Barney Scott, Kiasu Group

4 Property Maintenance Problems you Need to Fix ASAP

Posted on by rob.fullsend

As a landlord or a building owner, it is your responsibility to keep your property safe and secure. It may seem like a minor duty, but failure to do so will put employees and occupants at risk. If necessary repairs are not completed, you will be legally liable for anything that occurs as a result.

Some repairs are not essential and can be put off, like marks on the wall. But eventually, they will need to be fixed. 

Other issues, however, must be addressed quickly to maintain health and safety levels. But how do you know what minor and what is a serious potential health and safety hazard?

4 Property Maintenance Problems to Fix ASAP

To help you get a basis of what property maintenance problems need to be addressed first, we have listed the top four fixes you need to get done ASAP. If any one of these problems occurs on your site, make sure to tackle them promptly and do not tempt fate by leaving them too late. 

1. A Broken Boiler

A broken boiler is a nuisance, and while you might get away with not fixing it immediately through the summer months, this will be an essential repair as winter approaches. With a broken boiler, you will be unable to keep your building effectively heated, leaving the occupants cold and uncomfortable.

Alternatively, if you are a landlord, you’ll find that a broken boiler will mean that occupants won’t be able to wash their dishes or bathe. As a result, your occupants have every right to immediately demand you fix an issue like this and take the matter further if you do not. Don’t forget if you’re responsible for energy bills, a broken boiler will often cause the costs to balloon, so it is in your best interests to fix it as soon as possible.

If you’re concerned about a sudden boiler breakdown on your property, you can prevent this with regular services of your boiler. Doing this can ensure repairs can be completed before a repair is needed, saving you a lot of time and money.

For expert help fixing your boiler, rely on our expert and emergency services available, or why not find out more about boiler replacements?

2. Damaged Sprinklers

Your sprinklers might not be something you give much thought to after installation, as they hopefully should not see often use other than for fire drills etc. But did you know your sprinkler systems must be checked regularly? 

Issues with the sprinkler systems can be caused by corrosion over time. If the pipes corrode, the sprinkler system won’t work effectively in the event of a fire, putting employees, workers and occupants at serious risk. It could lead to them struggling to get out safely when a fire occurs. 

If a scheduled check or fire risk assessment reveals an issue with the sprinkler system, get it repaired immediately. Otherwise, the lives of the people inside your building could be left at risk. 

3. A Clogged Drain

A clogged drain may not seem like a serious issue that needs prompt attention, but it can significantly reduce the standard of living of the occupants of the building. If a drain is blocked, it will be unusable and could make simple processes such as washing dishes impossible. Typically, residents of a building will want this issue fixed on the same day, even if they might have been responsible for causing it in the first place!

However, more than just a general annoyance, a clogged drain can quickly lead to other issues, such as nasty smells and hygiene problems. This is not something you want to spread to the rest of the property, so getting the issue fixed should definitely be a priority.

If you cannot unclog the drain yourself, you should promptly arrange for an experienced professional to unblock the drain. 

4. Gas leak

Arguably, this is one of the most dangerous issues in your building, as it can quickly be fatal. A gas leak could quickly lead to a catastrophic explosion. Need we explain any further? 

At the first sign of a gas leak, the entire building should be evacuated immediately and remain vacated until it can be repaired. Even if a spark does not trigger an explosion or a fire, leaking gas can still harm one’s health. The symptoms of gas poisoning vary from minor to severe, including headaches, fatigue, nausea, loss of consciousness and even suffocation. 

An emergency plumber can help you fix a gas leak and advise further on the seriousness of the incident and the next course of action. 

The importance of Reactive Property Maintenance 

Congratulations, you made it to the end of our list! If you’ve read this far, we hope you see why these maintenance issues must be immediately fixed on your property. If left untended, some of these problems can prove to be fatal, so it is a no-brainer to address them promptly! 

At Kiasu Workforce, we firmly believe in the phrase ‘better safe than sorry’, which is why we are pleased to offer a range of property maintenance services. This ensures potential problems are identified and addressed before they impact your building or occupants. 

For more advice, why not contact our friendly team to find out how we can help you?

Related

When you should (and shouldn’t) call an emergency plumber

5 property maintenance tips for landlords

A handy property maintenance checklist

kiasu contact details footer

The Essential Safety Checks of Commercial Building Maintenance

Posted on by rob.fullsend

Commercial building maintenance

No matter what kind of commercial building you own or run, it’s vital to maintain it carefully and correctly. If you don’t pay attention to the regular maintenance requirements, you’ll pay for it later. Ignoring problems or not even checking for them in the first place won’t make them go away.

If you want to learn more about maintaining a commercial property, you’ve come to the right place. We will cover all of the essentials and explain why they’re important. By reading all of the information below, you’ll better understand what it takes to maintain your commercial property. So read on now to learn about all the maintenance inspections you need to keep your building in top condition.

Why Do Building Maintenance Inspections Matter?

First, we need to discuss why these checks and property maintenance procedures are necessary. For a commercial space to function correctly and offer fundamental safety and security to the people working inside it each day, it must undergo regular maintenance checks. This doesn’t happen by itself.

It’s very easy to coast along and assume everything is fine. Still, you won’t know that for sure until you actively seek out problems and carry out proper checks. Now it’s time to look at the inspections and maintenance tips you should know.

The regular checks you’ll need to make

Many areas require inspections, and each area requires several different checks. Here are the areas of your property you will need to check to meet safety standards and legal requirements routinely:

Checking and double-checking all alarms

You should make sure you have various types of alarms on your property. You’ll require a burglar alarm to ensure the building is secure 24 hours a day. On top of that, you should have fire alarms in place to comply with all relevant fire safety regulations. Once you have all of those alarms, you should ensure they’re regularly checked and double-checked to ensure that they’re functioning the way they’re meant to.

Fire Safety Inspections

One of the most dangerous threats that every property must strive to avoid is a fire. Several of the other inspections covered in this guide will help prevent fires and help keep you safe if one does break out. For example, fire alarms (as discussed above) will alert you to a fire. And some of the electrical testing (which we cover later) will identify potential fire risks so you can fix them before they cause an incident. In addition to these, however, you will also need regular fire door inspections. In the event of a fire, fire doors are essential to reducing the spread and containing the problem. However, over time they will suffer wear and tear. Regular checks will be able to highlight any significant damage that will prevent them from functioning correctly.

PAT Testing By The Book

Portable appliance testing is necessary for every commercial setting. It’s a vital aspect of health and safety and ensures electrical appliances are safe for use without any risk to the employees interacting with them. PAT testing has to be done carefully and by the book. A series of visual and electronic tests have to be carried out before an appliance can be passed as safe for use. These tests need to be completed regularly; it’s not enough to pass them once and then forget about them.

Plumbing And Pipe Checks

When something goes badly wrong with the building’s plumbing, you’ll know about it, and it certainly won’t be pleasant to deal with. Burst pipes or blockages can quickly get messy, making the commercial space unsafe and unusable until the problem is put right. That’s why regular plumbing and pipe checks are vital. When you carry out those checks, you can spot potential issues or minor problems before they become more severe. It is best to identify and fix the issue early to avoid potential disruptions. These checks need to be done thoroughly and carefully to ensure nothing is missed.

Annual Electrical Checks

All electrical components need to be checked annually. Faulty electrics pose several serious risks, including the threat of electrocution. Plus, faulty electrics are a fire hazard. Therefore these checks are crucial to a building’s safety. When it comes to electrics, it’s not worth taking any chances. Outlets, breaker boxes and switches should be reviewed and assessed for safety concerns and potential issues. 

Things like cracks or signs of deterioration should be spotted as early as possible. It is important to rectify these issues before they worsen and cause a bigger, more serious problem. It’ll save you a lot of time and money in the future if you do. And more importantly, it can prevent a harmful (or even deadly) incident such as a fire.

Regular Roof Inspections

Roof inspections might not apply to every business as they might be a contained office in a larger building. But if you are maintaining a whole building, you’ll need to ensure the roof is regularly inspected for faults and damage. Let a professional carry out these checks because they can be risky if carried out by someone who doesn’t know what they’re doing. It’s imperative to carry out these inspections if there’s recently been a lot of stormy or generally adverse weather in your area.

Commercial Property Maintenance - Roof inspections& Roof repair - Kiasu Workforce

Maintaining HVAC Systems

Without regular maintenance, an air conditioning system’s effectiveness can subside. They become less energy efficient – costing you more for the same results. Eventually, your HVAC system may not even be able to function to the same level at all. Furthermore, as with all maintenance inspections, HVAC servicing will identify small problems before they become bigger. If left unattended, these issues could leave you without air conditioning and a sizable repair bill. So make sure you spot them early and fix them while the issue is still small. 

Ventilation and Air Quality Control

Dust fumes and airborne contaminants can cause a range of health issues. Air quality is a serious concern that needs to be properly monitored. Ongoing inspections are crucial to ensuring your ventilation minimises these risks. In some cases, such inspections are a legal requirement. The Control of Substances Hazardous to Health Regulations (COSHH), for example, requires Local Exhaust Ventilation (LEV) systems to be tested every 14 months.

Preventative Maintenance and Inspections

Property maintenance will be far easier for you if you stay on top of things. It’ll allow you to spot small problems before they get the chance to develop into much bigger ones. Each of the checks listed above will be vital for commercial property to function properly and run smoothly. Left unattended and unchecked, any one of these areas could lead to a significant problem resulting in costly fixes or even harm to yourself or others. Please don’t ignore them. 

Conclusion

Property maintenance will be a lot easier for you if you stay on top of things. It’ll allow you to spot small problems before they get the chance to develop into much bigger ones. Each of the checks listed above will be vital to the smooth functioning of your commercial property, so don’t forget about them.

Our team is equipped to help you with any commercial property maintenance needs you might have so if you need any of the property checks mentioned above, don’t hesitate to get in touch with Kiasu Workforce on 0208 988 1662 or email us at 

 

The 10 most common boiler problems

Posted on by rob.fullsend

List of Boiler Problems

The average homeowner may not have much cause to notice the boiler. So long as it’s working fine, there’s no reason to. However, when there’s a boiler problem, it becomes a huge concern, resulting in a lack of heating for the home, as well as hot water. Here, we’re going to look at the ten most common concerns regarding your boiler, so you know what you need when it comes to boiler repair.

10 most common boiler problems - Kiasu Workforce

No heat or hot water

The most common reasons for this are broken diaphragms, broken airlocks, the failure of motorised valves, or low water levels. You can check boiler pressure and the thermostat, which can be adjusted. Otherwise, you may need a replacement part as part of your boiler repair.

Leaking and dripping

There can be many causes, including broken pump seals or pressure valves. Finding the source of a leak is all about finding the location. However, attempting leaking repairs is incredibly dangerous, so it’s best to rely on an engineer.

Pilot light snuffs out

A broken thermocouple stopping the gas supply or a deposit building in the light can snuff out a pilot light. Otherwise, it may be that a draught simply blew it out, in which case you can relight it yourself. Before you do that, ensure there are no issues with the gas supply. If there are, arrange a boiler repair.

Low boiler pressure

If your heating is functioning properly, check the built-in pressure gauge. If it’s below one, the pressure is too low due to a leak or an old pressure valve.

Frozen condensate pipe

Condensing boilers have a pipe that leads out from the boiler to an exterior drain. This leaves them at risk of freezing. You can thaw a frozen pipe by pouring warm water over it. If you don’t feel comfortable doing that, however, you should call an engineer.

Faulty thermostat

A thermostat can lose accuracy or turn the heating on and off when it’s not supposed to if it’s too old. Make sure it’s in the on position and set properly before you replace it, however.

Strange noises

If there is a whistling, banging, or gurgling noise, it’s most often caused by air trapped in the system, kettling or low water pressure. During your boiler service, the engineer can recognise the difference between noises and the cause, as a result.

Kettling

Rumbling and whistling noises, as mentioned above, can be a result of kittling. Limescale and other deposits build in the boiler, restricting the flow of water and heating it to boiling point which causes those sounds. You can have the boiler flushed as part of your boiler repair to solve it.

Radiators have trouble heating

The most common reason for parts of the radiator, such as the middle or the bottom, having trouble heating is due to the build-up of deposits inside restricting the flow of water. There are plenty of guides online that show you how to bleed the radiator or balance it to get rid of this issue.

Boiler switches itself off

There are many causes, including low pressure, thermostat issues, and closed valves restricting water flow. If this is a common issue, a boiler service is recommended.

Besides seeking the repairs your boilers need as soon as possible, you should try to stay ahead of any potential problems to minimise the stress involved. If your boiler is old and falling apart, a new boiler installation can cut the cost of repairs. A routine boiler service can highlight any lurking issues and stop them from becoming a more serious problem, too.

If you find that your boiler is in need of a service, or if you need a completely new boiler installed, don’t hesitate to get in touch. Call us today on 0208 988 1662 or send us an email.